Lazer Tüpleri
there are no products in the cart
Drop Down Menu
Lazer Tüp Montajı
Lazer Yedek Parça
BAYIM OL AYKA MAKINA
W4 Reci Lazer Tüp
Kaliteli Lazer Tüp
Lazer Tüp Fiyatları
Reci Lazer Tüp
Our Products / Reci Laser Tube 10.000 Hours Lifespan / Reci Laser 80W W2 10.000 Hours Lifespan
Skype Me!
Quantity Price Piece(s) Total Price
Total Price

Reci Laser Tube-W Series-W2

 

*Max to 10,000 Hours Life Span

 *Beter Performance

 *Higher Efficiency

 

TECHNICAL PARAMETERS OF W2  80W

Model

Rated Power (w)

Max Power (w)

Lenght (mm)

Diameter

(mm)

Catalyze

Life Span

   (h)

W2

80

90

1200

80

Evet

10.000

 

 Installation Requirement

 Make sure to follow the operation instructions of model W2.

The positive pole is in high voltage (the ignition voltage is 19kv)

 

 Working Performance

 Cutting function.

 Engraving function: Very good, when the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving.

 Operation conditions

 Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10-40.

 The operating environment: temperature 2-40, humidity 10-60%.

 The working current: test current is 29mA. Maximum working current is 29mA. The running current must be kept below 27mA. The life span can reach 10,000hours if the current is kept below 25mA. The ammeter indicating current must be connected to the negative electrode of the laser tube.

 When it is working under over-high current for long term, the negative pole will appear  light yellow, and the life span will be reduced rapidly.

 To protect dust from going into the insulation sheath, please wrap it with plastic film.

 

 
Reci Laser Tube v2
  • Reci Laser Tube v2

    Reci Laser Tube v2

Application Areas
Privacy and Terms of Use   |   Shipping and Handling   |   Delivery and Return    |   Consumer Rights
your e-mail address  
2017 | Lazer Tüplerinde 8 Ay Garanti | All rights reserved.